ILBINO SINCRO

 ILBINO SINCRO

ILBINO SINCRO photocell
Programmable infrared photocell.
ILBINO SINCRO PHOTOCELL is ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.
ILBINO SINCRO
Pair of synchronized mini photocells.
Range 25 m.

CHARACTERISTICS ILBINO SINCRO PHOTOCELL
Power supply                                       12/24±10% Vac/dc
Characteristics                                     25 m
RX consumption                                   (a 24 Vac) 40 mA
TX consumption                                   (a 24 Vac) 50 mA
Max. relay voltage                               30 Vdc
Working temperature                        -20 +55°C
Protection level                                   IP 44
Dimensions                                           70×30 mm

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

INFRARED BARRIERS WITH ADJUSTABLE LENSES

POWER SUPPLY 12/24Vac-dc
RANGE 15m – 60m
SENSITIVITY ADJUSTMENT CDR851 – CDR852A
SHIELDED LENSES – GREATER IMMUNITY TO INTERFERENCE
Modulated infrared barrier consisting of a transmitter and a receiver.
It constitutes an efficient safety system for the protection of passageways or
spaces which are equipped with automatic doors or gates.
A shockproof designer case, pleasing on the eye, encloses innovative technical
solutions which make the system extremely reliable under all working conditions.
The vast range of available models meets all possible system requirements.
Technical description
Anti-tamper aluminium case IP66 CDR842A – CDR852A
Shockproof case IP55 CDR841 – CDR851
Self locking adjustable lens which can be rotated horizontally through plus or
minus 90° (± 45° for the CDR841I) and vertically through plus or minus 30° with
respect to the standard installation position.
These adjustments permit lateral fitting and installations where the transmitter and
receiver are at different heights.
Double-relay with serial exchange on the receivers as requested by the standards
regarding protection against accidents for motorized gates and doors.
2 indicator LEDs:
– red – indicating that the transmitter is receiving power;
– red – (photocells out of alignment or the beam is interrupted) in the receiver.
Test point (for fine tuning) on the receiver.
Sensitivity adjustment trimmer on models CDR851 – CDR852A.